Home – Our expertise – Surface treatment France
NDT
Non-destructive testing
Non-destructive testing
→ Hardness
→ Conductivity
→ Magnetic particle inspection Capacities: 1,300*300
→ Dye penetrant testing S2 – S3 – S4 Capacities: 1,900*1,600
→ Conductivity
→ Magnetic particle inspection Capacities: 1,300*300
→ Dye penetrant testing S2 – S3 – S4 Capacities: 1,900*1,600
CHEMICAL CONVERSION COATING
→ Alodine 1200
→ Chromate and non-chromate passivation
Capacities: 1,600*500*800
→ Chromate and non-chromate passivation
Capacities: 1,600*500*800
ELECTROLYTIC CONVERSION COATING
→ Chromic acid anodizing 1,980*800*450
→ Sulfuric acid anodizing
→ Sulfuric acid anodizing of titanium
→ Sulfuric acid anodizing
→ Sulfuric acid anodizing of titanium
ELECTROPLATING
→ Silver plating 770*580*520
→ Cadmium plating 1,800*680*880
→ Cadmium plating 1,800*680*880
OTHER TREATMENTS
→ Gentle electropolishing 710*600*1,100
→ Degassing / dehydrogenation
→ Stress-relieving treatment
→ Degassing / dehydrogenation
→ Stress-relieving treatment
Four drying ovens with a capacity of up to 4 m² and 400°C
PAINTS
→ Epoxy
→ Water soluble
→ Polyurethane
→ Molykote® products on treated or non-treated parts
→ Sanding and painting of composite materials
→ Polymerization from 80 to 400°C
→ Parts treated prior to painting Paints applied to parts having undergone electrolytic or chemical treatments
→ Unmachined parts Paints applied directly on the base metal and on composites
→ Water soluble
→ Polyurethane
→ Molykote® products on treated or non-treated parts
→ Sanding and painting of composite materials
→ Polymerization from 80 to 400°C
→ Parts treated prior to painting Paints applied to parts having undergone electrolytic or chemical treatments
→ Unmachined parts Paints applied directly on the base metal and on composites
Two standard spray booths (6 m x 3 m)
Two 80-degree drying ovens
One sanding booth
One spray booth for composites
Two 80-degree drying ovens
One sanding booth
One spray booth for composites
